|
| SEAL Mounting and Laminating Films & Adhesives
When you select a SEAL material to convert your print, you can be sure of quality, performance and value. With over 300 different heat-activated, heat-set and pressure-sensitive materials to choose from, each roll of film is specially constructed for perfect mounting, laminating or encapsulating according to your print type and application.
Tried and tested on the market leading SEAL range of professional wide format laminators, every material is designed for high performance, optimum image vibrancy and protection and virtually always available in a choice of many different finishes and sizes.
Depending on the finished product you are looking to produce, you may need one or a combination of different materials that will effectively ‘sandwich’ your print to form your graphic. The possible layers of the sandwich and types of SEAL products you would need are shown below: | |
Over-laminating Film - A clear film with an adhesive that is applied to the top or front side of an image. An over-laminating film can also be applied to both sides of an image. This is known as encapsulating.
Here are some options, click on any of the seal products below to view a short information video:
Heat Activated and Heat-set
Print Guard UV
Floor Guard
JetGuard Gloss and Crystal Matte
JetGuard Deep Crystal
ThermaShield
Pressure Sensitive
Print Shield Standard UV
Seal Write
Mounting Adhesive - An adhesive material (film) that is used to bond a printed image to a substrate or surface. Adhesive can be applied to the face or back of an image depending on the finished product.
Here are some options, click on any of the seal products below to view a short information video:
Print Mount White and Delta
Print Mount Ultra and Plus
OptiMount Ultra
Backing Film - Designed to apply to the backside of a printed image to obtain some level of opacity and rigidity to prevent curling when rolled up. Backing films ‘encapsulate’ the image as an over-laminating film is also applied to the top.
Here are some options, click on any of the seal products below to view a short information video:
Stoplight and PS Stoplight
For advice on selecting the right SEAL material for your finished product, click on one of the options below:
Selecting your Mounting Adhesive
Selecting your Over-laminating Film
Selecting your Backing Film
Glossary of Terms
Or to browse the selection of SEAL Mounting and Laminating Films and Adhesives click on one of the product types below:
Over-Laminating Films
Backing Films
Mounting Adhesives
back |